TQP3M6005 mid band dual lna (1700-2000 mhz) applications ? base station receivers ? tower-mounted amplifiers 16-pin 4x4mm lead less smt package product features functional block diagram ? 0.36 db noise figure (single channel) ? 1700-2000 mhz ? 17.9 db gain (single channel) ? +13.4 dbm iip3 (single channel) ? compact 4 x 4 mm package ? rohs compliant, pb-free general description pin configuration the TQP3M6005 is a low noise dual phemt discrete device operating from 1700 - 2000 mhz. n oise figure is typically 0.36 db per channel and 0.54 db when used in a balanced configuration with a balun. the TQP3M6005 consists of a single monolithic gaas die mounted in a compact 4 x 4 qfn package. this device is a dual discrete lna intended to be used as a balanced pair in wireless networks applications. the TQP3M6005 is packaged in a pb-free / rohs-compliant, compact 4x4 mm surface-mount leadless package. the TQP3M6005 is useful in a number of differen t applications, and is particularly well suited for cellular o r wimax base station or tower-mounted amplifier products. ordering information part no. description TQP3M6005 mid band dual lna standard t/r size = 2500 pieces on a 7? reel. pin # symbol 1, 2, 3, 4, 9, 10, 11, 12 nc (no connect) 6, 7, 14, 15 gnd (ground) 5 v g a 8 v g b 13 v d b 16 v d a backside paddle rf/dc ground datasheet: rev c 04-29-11 - 1 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ?
TQP3M6005 mid band dual lna (1700-2000 mhz) datasheet: rev c 04-29-11 - 2 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? specifications absolute maximum ratings parameter rating storage temperature -65 to 150 c drain voltage +5 v gate voltage -1.0 to +0.5 v drain current (per channel) 330 ma gate current (per channel) 5 ma rf input power (b alanced) +10 dbm power dissipation 1.1 w operating channel temperature 150 c mounting temperature (10 seconds) 260 c operation of this device outsi de the parameter ranges given above may cause permanent damage. recommended operating conditions parameter min typ max units v d 4.5 v i d (per channel) 50 ma operating temp. range -35 +85 c electrical specifi cations are measured at sp ecified test conditions. specifications are not guaranteed over all recommended operating conditions. electrical specifications test conditions unle ss otherwise noted: v d =4.5 v, freq.= 1850 mhz, i d =50 ma per channel, t a =25c parameter conditions min typical max units operational frequency range 1700 2000 mhz drain voltage (1) , v d 2 4.5 5 v gain dual channel (2) 16.0 17.7 db noise figure dual channel (2) 0.54 0.72 db noise figure per channel 0.36 0.50 db reverse isolation 20 22 db output p1db dual channel (2) 21.6 dbm input ip3 dual channel (2,3) f=1700 mhz 12 14 dbm input ip3 dual channel (2,3) f=1850 mhz 15 dbm input ip3 per channel (3) f=1700 mhz 9.5 dbm input ip3 per channel (3) f=1850 mhz 13.4 dbm isolation between gate 1 and gate 2 26 db isolation between drain 1 and drain 2 24 db thermal resistance (jnc. to case) ? jc 146 c/w notes: 1. v d is set based on a 1.5 ohm resistor in the drain path. see test diagram or schematic. 2. balanced pair, with baluns 3. pin/tone = -13 dbm, 8 mhz tone spacing
TQP3M6005 mid band dual lna (1700-2000 mhz) reference design 1700-2000 mhz bill of material ref des value description manufacturer part number u1 n/a mid band dual lna triquint TQP3M6005 c1, c10 2.4 pf capacitor, 0603, +/-0.1 pf npo various c2, c12 10 pf capacitor, 0603, 5%, npo various c3, c13 22 pf capacitor, 0603, 5%, npo various c4, c14 1.2 pf capacitor, 0603, +/-0.1 pf npo various c5, c15 12 pf capacitor, 0603, 5%, npo various c6, c16 2.2 pf capacitor, 0603, +/-0.1 pf npo various c7, c17 1 uf capacitor, 0603, 10%, x5r various c8, c18 10 uf capacitor, 0603, 20%, x5r various c9, c19 0.01 uf capacitor, 0603, 10%, x7r various r1, r2, r11, r12 0 ohm resistor, 0603, 5%, 1/16w various r3, r13 8.2 ohm resistor, 0603, 5%, 1/16w various r4, r14 1.5 ohm resistor, 0603, 5%, 1/16w various r5, r15 50 ohm resistor, 0603, 5%, 1/16w various l1, l11 10 nh inductor, 0603, 5% coilcraft 0603cs-10nxjlw l2, l12 3.6 nh inductor, 0603, 5% coilcraft 0603cs-3n6xjlw l3, l13 2.2 nh inductor, 0603, 5% coilcraft 0603cs-2n2xjlw l4, l14 33 nh inductor, 0603, 5% coilcraft 0603cs-33nxjlw l5, l15 1.2 nh inductor, 0402, 5% coilcraft 0402cs \ 1n2xjlw l6 l16 43 n h i ndu cto r 0 603 5% coilcraft 0 603 cs 43 nxjlw n otes: 1. see pc board layout, page 4 for more information . 2. zero ohm jumpers may be replaced with copper traces in the target application layout. 3. though not shown on reference design, grounding recommended on pins 6, 7, 14 & 15 for optimal isolation be tween amp a and b. datasheet: rev c 04-29-11 - 3 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ?
TQP3M6005 mid band dual lna (1700-2000 mhz) typical performance 1700-2000 mhz (balanced configuration) test conditions unle ss otherwise noted: v d =4.5 v, i d =50 ma per channel, t a =25oc frequency mhz 1700 1850 2000 gain db 18.7 17.7 16.8 input return loss db -18 -20 -18 output return loss db -23 -26 -38 output p1db dbm +21.5 +21.6 +21.7 input ip3 at -13 dbm pin/tone, 8 mhz tone spacing dbm +14 +15 +15.9 noise figure db 0.5 0.54 0.58 15 16 17 18 19 20 1.70 1.75 1.80 1.85 1.90 1.95 2.00 gain (db) frequency (ghz) gain vs. frequency temp. = +25 ? c -50 -40 -30 -20 -10 0 1.70 1.75 1.80 1.85 1.90 1.95 2.00 return loss (db) frequency (ghz) return loss vs. frequency input return loss datasheet: rev c 04-29-11 - 4 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? output return loss temp. = +25 ? c 0.0 0.2 0.4 0.6 0.8 1.0 1.70 1.75 1.80 1.85 1.90 1.95 2.00 nf (db) frequency (ghz) noise figure vs. frequency +22 c ? 35 c 0.2 0.3 0.4 0.5 0.6 0.7 1.70 1.75 1.80 1.85 1.90 1.95 2.00 nf (db) frequency (ghz) noise figure vs. frequency +100 c +85 c vd=4.5 v vd=3.5 v 20 21 22 23 1.70 1.75 1.80 1.85 1.90 1.95 2.00 output p1db (dbm) frequency (ghz) output p1db vs. frequency +22 c ? 35 c +100 c 12 14 16 18 20 1.70 1.75 1.80 1.85 1.90 1.95 2.00 iip3 (dbm) frequency (ghz) iip3 vs. frequency 8 mhz tone spacing pin/tone = -13 dbm +22 c ? 35 c +100 c +8 5 c +8 5 c
TQP3M6005 mid band dual lna (1700-2000 mhz) pin description pin # symbol description 1, 2, 3, 4, 9, 10, 11, 12 nc (no connect) no electrical connection. land pads should be provided for pcb mounting integrity. 6, 7, 14, 15 gnd (ground) grounding recommended for optimal isolation between amp a and b 5 v g a rf input ? channel a 8 v g b rf input ? channel b 13 v d b rf output ? channel b 16 v d a rf output ? channel a backside paddle rf/dc ground rf/dc ground. provide recommended via pattern and ensure good solder attach for best thermal and electrical performance. applications information pc board layout pcb material (stackup) single-layer, 20 mil thick rogers ro4350b 2.8 mil copper top and bottom the pad pattern shown has been developed and tested for optimized assembly at triquint semiconductor. the pcb land pattern has been developed to accommodate lead and package tolerances. since surface mount processes vary from compan y to company, careful process development is recommended. datasheet: rev c 04-29-11 - 5 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ?
TQP3M6005 mid band dual lna (1700-2000 mhz) mechanical information package information and dimensions material: lead-free/green/rohs-compliant. contact plating: enig package marking: part number ? 6005 assembly code - xxxx year, week - yyww 6005 xxxx yyww mounting configuration ? datasheet: rev c 04-29-11 - 6 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ?
TQP3M6005 mid band dual lna (1700-2000 mhz) product compliance information esd information esd rating: class 1a value: > 250v to <500v test: human body model (hbm) standard: jedec standard jesd22-a114 esd rating: class iii value: > 500v to <1000v test: charged device model (cdm) standard: jedec standard jesd22-c101 msl rating level 3 at +260 c convection reflow per jedec standard ipc/jedec j-std-020. solderability compatible with both j-std-020 lead-free (maximum 260 c reflow temperature) and lead (maximum 245 c reflow temperature) soldering processes. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information abou t triquint: web: www.triquint.com tel: +1.503.615.9000 email: info_wireless@tqs.com fax: +1.503.615.8902 for technical questions a nd application information: email: info_wireless@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the information contain herein. triquint assumes no responsibility or liability whatso ever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and th e entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any part y any patent rights, licenses, or any other intellectual prope rty rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reason ably be expected to cause severe personal injury or death. datasheet: rev c 04-29-11 - 7 of 7 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ?
|
